(855) 598-3288 — Beaverton's 24/7 Fence Company
Open 24/7 Beaverton, OR & Washington County Licensed & Insured (855) 598-3288
cedar privacy fence Beaverton
Cedar Privacy Fence

Cedar Privacy Fence Installation in Beaverton, OR

Full-seclusion western red cedar privacy fences built for Beaverton backyards — board-on-board, tongue-and-groove, and good-neighbor styles that block sightlines, soften noise, and add curb appeal.

Free estimates 24/7 Licensed, bonded & insured Beaverton & Washington County
Open 24/7Call any time for a privacy fence quote
Licensed & InsuredActive Oregon CCB, bonded & insured
Beaverton + Washington CountyLocal crews across the metro

Why cedar is the best wood for a PNW privacy fence

When you want a private backyard in Beaverton, western red cedar is hard to beat. Cedar is the best wood for a privacy fence in the Pacific Northwest because it's loaded with natural oils and extractives that resist decay and insects without any chemical pressure treatment. That matters here, where constant rain and damp soil rot lesser lumber from the ground up. A properly built, maintained cedar privacy fence lasts roughly 15 to 25 years — and even unsealed it weathers gracefully to a silver-gray rather than rotting out.

Cedar is also dimensionally stable, so it resists the warping and cupping that ruin the clean, gap-free look of a privacy fence. We use kiln-dried (and, on request, thermally modified) cedar so the boards have already given up most of their moisture and stay put through Beaverton's wet-to-dry seasonal swings. The result is a fence that stays straight, stays private, and looks good for decades. Browse all of our Beaverton fencing services or call Beaverton Fence Pro to start.

Privacy Styles

The most private cedar fence styles we build

Style decides how much you see — and how much your neighbors do.

Board-on-board

Overlapping pickets give full privacy with airflow and leave no gaps even as the wood moves with the seasons. The most popular full-privacy cedar style in Beaverton.

Tongue-and-groove / solid-board

Boards interlock for a completely solid, premium wall of cedar — total visual coverage and a high-end look with zero see-through.

Good-neighbor & semi-privacy

Alternating pickets look identical from both yards. A spaced semi-privacy version lets in light and air while still screening sightlines.

Height, design & sloped Beaverton lots

A privacy fence should be tall enough to actually block sightlines. The standard answer for Beaverton is a 6 ft cedar fence — enough to screen a typical backyard, patio, hot tub, or pool area from neighbors and the street. We finish the top with options that suit your taste: a flat cap rail for a clean modern edge, or a decorative lattice top that adds a few inches of screening and a softer look.

Sloped lots are common around Cooper Mountain, Sexton Mountain, and the west-side hills. We build privacy fencing two ways on a grade: stepped, where each panel drops in level increments, or raked, where the fence follows the slope for a continuous line with no triangular gaps at the bottom. We'll recommend the right method for your terrain on site. For a contemporary alternative, ask about a horizontal cedar privacy fence.

Build Quality

How we build a cedar fence that won't warp or lean

Privacy panels are heavy and tall, so the structure underneath has to be right.

  1. Layout & property line check. We mark the line, confirm boundaries, and verify Beaverton height rules before digging.
  2. Set strong posts. For tall privacy panels we recommend steel posts — stronger and longer-lasting than wood — set in concrete over a gravel drainage base.
  3. Frame square & level. Rails are leveled and squared so the panels hang plumb and the line stays dead straight.
  4. Pickets above grade. We hold picket bottoms above the soil so ground moisture can't wick up and rot the boards early.
  5. Finish & tops. Cap rail, optional lattice top, and gates go on, then we clean the site and walk the fence with you.

Want a fully private backyard?

Call Beaverton Fence Pro for a free cedar privacy fence estimate. We answer 24/7 and build seclusion fencing across Beaverton and Washington County.

(855) 598-3288

private cedar backyard fence noise buffer

Privacy, quiet & lasting value

A solid cedar fence does more than block the view. By filling in the gaps a board-on-board or tongue-and-groove fence blocks sightlines into your yard, gives a real sense of enclosed security, and acts as a noise buffer that softens street and neighbor sound — a genuine difference next to busy corridors. And because cedar resists rot and insects, the privacy you pay for stays intact for years.

  • Full sightline screening for patios, pools & hot tubs
  • Noise buffering from streets & neighbors
  • Kiln-dried cedar & steel posts resist warping & rot
  • Weather to gray or stain — your call on maintenance

Maintenance, cost factors & related options

Cedar maintenance is genuinely low. You can let the fence weather naturally to a silver-gray and do nothing, or apply a stain or sealer every few years to preserve the warm tone and add water resistance — either path gives you that 15-to-25-year service life. Cost is driven by the things you control: total length, height, the style you choose (solid-board costs more than spaced), the number of gates, and how steep your terrain is. We give honest, itemized estimates so you can see exactly where the budget goes.

Comparing materials? Our standard wood fence installation page covers picket and good-neighbor builds, and if your privacy fence wraps a pool, see our pool privacy fencing for code-compliant barriers. Serving the west side — check fencing in Cedar Hills.

Choosing the right cedar privacy build for your yard

What makes western red cedar the right wood for a private fence in this part of Oregon isn't just looks — it's chemistry. The heartwood is packed with natural extractives and oils, the tree's own defense against decay and wood-boring insects. That built-in resistance is why cedar holds up against the constant damp and standing winter moisture that rots untreated pine, and it does the work without any chemical pressure treatment soaking into your backyard. Pair that resistance with proper construction and you get the full 15-to-25-year service life rather than a fence that softens at the base after a handful of wet seasons.

The style decision is also a privacy and movement decision

Each full-privacy style trades coverage, cost, and how it handles seasonal wood movement. Board-on-board overlaps the pickets so the seams stay covered even as cedar expands and contracts through wet-to-dry swings — it stays gap-free for life and lets a little air pass, which keeps the panel from acting like a solid sail in wind. Tongue-and-groove and solid-board interlock or butt the boards into a continuous wall with zero see-through and a premium, finished face, the most complete visual block you can buy. Good-neighbor alternates pickets from side to side so the fence reads identical from both yards, a fair choice on a shared property line. A spaced semi-privacy layout screens direct sightlines while letting light and breeze through. There's no single best answer; the right pick depends on how much seclusion, airflow, and budget you want.

Posts and anti-warp prep carry the weight

A tall privacy panel is heavy and catches wind like a sail, so the posts underneath decide whether the line stays plumb or starts to lean. Wood posts work on shorter runs, but under full 6 ft privacy panels we recommend galvanized steel posts — they don't rot, twist, or flex the way timber can once it's loaded and soaked, and they hold a dead-straight line for decades. Just as important is the wood itself. We build with kiln-dried cedar, and thermally modified cedar on request, so the boards have already released most of their moisture before they go up. Green lumber that dries in place is what cups, twists, and opens gaps in a privacy fence; pre-dried stock stays flat and tight through Beaverton's moisture cycles. Whether you let the fence weather to silver-gray or keep it sealed in its warm tone is purely a maintenance preference — either way the structure underneath is what makes it last.

Quick Answers

Cedar privacy fence FAQs

Straight answers — no clicking around.

Should I let cedar weather gray or stain it?
Both are fine. Left alone, cedar fades to an even silver-gray and still resists rot — many homeowners love that natural look and zero upkeep. If you prefer the warm reddish-brown tone, a stain or sealer every few years preserves the color and adds water resistance. It's purely a look-and-maintenance preference, not a structural one.
Can you add a lattice top or decorative cap to my privacy fence?
Yes. A lattice top adds a few inches of screening with an open, decorative look, and a cap rail gives a clean finished edge that also protects the picket tops from water. Both are popular upgrades on a 6 ft cedar privacy fence and we install them as part of the build.
What's the difference between full privacy and semi-privacy cedar fencing?
Full privacy (board-on-board, tongue-and-groove, or solid-board) leaves no see-through gaps. Semi-privacy spaces the pickets slightly to let light and air through while still screening direct sightlines. Full privacy is best for total seclusion; semi-privacy suits homeowners who want airflow and a lighter feel.
Can you build a cedar privacy fence on a sloped Beaverton lot?
Absolutely — it's common on west-side hill lots. We either step the panels down the slope in level increments or rake the fence so it follows the grade in a continuous line with no gaps at the bottom. We'll recommend the better method for your specific slope during the on-site estimate.

Free cedar privacy fence estimate

Talk to a licensed Beaverton fence builder about styles, height, and your timeline. Open 24/7.

(855) 598-3288
Call Beaverton Fence Pro
Call Now — Open 24/7